Although this entry focuses on the experience with the the KIRK 6000 Server, it also applies to the KIRK 300 server, although the sections within the configuration space may be a bit different. Look for the key words and entries specified below when configuring the 300, and it should work.

Additionally, this page focuses solely on basic KIRK phone/voice operability with SIPX, and does not cover the extended features offered by the KIRK 6000. You'll have to do a little of your own homework about the KIRK system, as this does not cover every specific administration feature of the KIRK phone. Plenty of good reference docs are found in the support section of the Polycom site.

Fields not mentioned below should be left in their default state, unless you have specific requirements.

At this time, I don't know of any way to auto-provision the phones through SIPX.

Setup of the KIRK server

Configuration section

General subsection
Wireless subsection
SIP subsection


List Users - Creating new users

Once you've saved the user, the User List page will show the users that have been set up. A few moments after the user has been set up, you can refresh the User List page and should see that the Enabled column is active, and that the Subscription and Registration columns are also active for the user. If all three are true, then the phone/account should be active.