Vegastream

The following example setup illustrates a working configuration of Vegastream 400 interoperating with SIPxchange; descriptions on the right provide details concerning entries made to the screen example on the left. Please refer to the Vegastream documentation for complete descriptions of each of the fields.

For sipX settings, access the sipX interface for the Configuration server, select Services from the left-hand main navigation menu, select Configuration, select Global Definitions from the screen that appears, and set the GW_DEFAULT_ADDR to the IP address of the Vegastream gateway in the associated field.

LAN Configuration
*Name: Vega400; the name of the gateway you want to use.
*LAN Profile: 1

LAN Profile 1

LAN Interfaces

DNS Servers

DSL Configuration

Port Configuration

Dial Planner (Profiles)

You will need at least two dial plans. One for calls coming in from the T1 interface, and the other for calls going out of the T1 interface. In this example, Profile IDs 2 ISDN_To_LAN and 3 LAN_to_ISDN_or_PBX are used (see the next Dial Planner profiles screens and associated field text).</p>

Modify Plan

Modify Plan

Media Capability

This is a list of the media capabilities supported by the Vegastream.</p>
G711 u-law Profiles

G729 AnnexA

SIP Configuration

Audio

You populate the Audio Profile fields with the coding algorithms RTP traffic is to use. Audio Profile 1 holds the first choice algorithm, Audio Profile 2 holds the second choice, etc.</p>

Miscellaneous

The defaults should remain intact. Check to make sure that your configuration is the same as shown here.</p>

SIP Advanced

The defaults should remain intact. Make sure your configuration is the same as shown here.</p>